Konica Minolta BIZHUB 163 Service Manual page 147

9. Adjustment item list
NOTE
• Before executing a memory clear, be sure to take notes of the settings and adjust-
ment data of Utility Mode, Service Mode., Security Mode, and adjust modes. After
the memory clear has been executed, re-enter those data.
• The following data of "ADJUST" are indicated at the factory on the adjust label
located inside the front door (The other side of the toner replacement label).
(PRN MAIN REGIST/PRN SUB REGIST/CCD MAIN ZOOM/CCD SUB ZOOM/CCD
MAIN REGIST/CCD SUB REGIST)
• The ATDC value at the time of setting up of the PC drum unit is also entered on the
adjust label at installation.
• The setting value after ATDC adjustment is written down in a adjust label.
112
Field Service Ver. 1.0 Apr. 2007