Setting In The Utility Mode; Admin. Management - Konica Minolta BIZHUB 163 Service Manual

5. Utility Mode
5.3

Setting in the UTILITY MODE

5.3.1

ADMIN. MANAGEMENT

A. NETWORK SETTING
(1) IP ADDRESS SETTING
Functions • This function is used to specify the IP address for the copier.
Use
NOTE
• Please consult customer's network administrator for information about the IP
address to use.
Setting/ • The default setting is "AUTO".
Procedure
• If [AUTO] is selected, the IP address is automatically acquired from the DHCP server.
• If [SPECIFY] is selected, the screen for entering the IP address appears.
• SUBNET MASK
Functions • This function is used to specify the subnet mask value for the network.
Use
NOTE
• Please consult customer's network administrator for information about the
subnet mask to use.
• Use this function when [SPECIFY] is selected for [IP ADDRESS SETTING].
Setting/ • IP address version 4 format
Procedure [0 to255]. [0 to 255]. [0 to 255]. [0 to 255]
• GATEWAY
Functions • This function is used to specify the default gateway (IP address) of a router on the
network.
Use
NOTE
• Please consult customer's network administrator for information about the
gateway to use.
• Use this function when [SPECIFY] is selected for [IP ADDRESS SETTING].
Setting/ • IP address version 4 format
Procedure [1 to 126, 128 to 254]. [0 to 255]. [0 to 255]. [1 to 255]
(2) DNS CONFIG.
Functions • This function is used to enable or disable the DNS (Domain Name System) setting. If
there is a DNS server on your network, enter the IP address of the DNS server.
Use
• If the DNS server is located within your local network, select [ENABLE]. If you are
using the DNS server of an Internet service provider (ISP) or some other DNS server
located outside your local network, select [DISABLE].
NOTE
• Please consult customer's network administrator for details.
Setting/ • The default setting is "DISABLE".
Procedure
14
"AUTO"
"DISABLE"
Field Service Ver. 1.0 Apr. 2007
SPECIFY
ENABLE