Avaya M770 Atm Switch User's Guide - Avaya M770 User Manual

Chapter 10 Managing PNNI Routing
The output in a tabular format includes the following information:
Field
Port
Hello
State
Nbr
State
Link
Status
Active
Time
Remote
Port
Remote
Node
132
The state of the Hello protocol on this link.
"twoWayInside"
"commonOutside"
"twoWay"
Indicates the state of the Neighboring Peer FSM that is used for
database synchronization. The state 'full' indicates that the nodes'
databases are in-synch. The state 'remote' indicates that the
synchronization protocol is not yet performed on this link. However,
it could be that there is a parallel link from a different slot of this
switch going to the same neighbor, and the synchronization is done
This field is not applicable for outside links, as database
synchronization is not performed between peer groups.
Indicates the status of the link between this node and its neighbor. A
uni-directional link indicates that the Nbr State is not full. This could
be due to another parallel link to the same neighbor (and the
synchronization is done over that link), or due to a problem in the
This field is not applicable for outside links, as database
synchronization is not performed between peer groups.
For an Inside Link or Logical Link, this indicates the time in seconds
that the neighbor's database is synchronized (i.e. the Nbr State is
For an Outside Link, it indicates the time in seconds since the Hello
reached a "commonOutside" state.
This is the port ID at the other end.
The 22 bytes node ID of the remote node.
Description
The local port number.
An inside link (within the peer group). The
node on the other side was discovered
correctly.
An outside link (to a node on a different peer
group). The node on the other side was
discovered correctly and a common parent
peer group was identified
A logical link. The logical node on the other
side was discovered correctly.
over that link.
synchronization protocol.
'full').

Avaya M770 ATM Switch User's Guide