System-Wide Commands; Viewing The Invariant Information In Boot Loader - Avaya M770 User Manual

System-wide Commands

This section describes system commands that are available in the BOOT Loader.

Viewing the invariant information in BOOT Loader

Invariant information is shared between the BOOT PROM image, the BOOT Loader
image and the main image. This is common information in all the image files.
To view invariant information, use the system invariant command.
Command:
Output:
Avaya M770 ATM Switch User's Guide
M15-155s8:/>system invariant
Software is running in 1.1+ mode
Serial Number is set to:....
BIA is set to :0000f6123456
Loader 1 : start OX12345678, length 345841
Loader 2 : start OXb2615678, length 345841
Selected boot image: 2
Done!
Software is running
BIA is set to
Loader is started
Selected boot image
Appendix B
Indicates the software image that is currently
running on the switch.
The BIA of the switch.
The BOOT Loader start address (in hexadecimals)
and the length of the BOOT Loader file.
The BOOT Loader image that has been selected.
Using BOOT Loader
279