Set Pnni Node Timers To Default Values; Set Pnni Node Timers - Avaya M770 User Manual

Set PNNI node timers to default values

Use the following command to set the PNNI node timers to their default values.
Command:
Parameters:
Output:

Set PNNI node timers

Use the following command to set PNNI node timers.
Command:
Parameters:
Examples:
Avaya M770 ATM Switch User's Guide
M15-155s8:/>route pnni config timers default <index(All=99)>
<level>
<index> the index of the timer , to set all timers type 99
Note: This request will set value for timers , according to
the index parameter.
Changes will take effect immediately.
M15-155s8:/>route pnni config timers set
<level>
<index> the index of the timer as appear in the 'show' screen.
<value> the value that the selected timer will get.
<level> Internal level number: 1 is the lowest (physical)
node.
route pnni config timers set 1 15 1
Note: This request will set value for timers , according to
the index parameter.
Changes will take effect immediately.
Chapter 10 Managing PNNI Routing
<index> <value>
161