Viewing Information About The Management Lec - Avaya M770 User Manual

Chapter 11 Managing the Management LEC

Viewing information about the management LEC

To view information about the management LEC, use the lane lec
show command.
Command:
The lane lec information command displays the information described in
Table 11.1.
Table 11.1
Field
BIA
LAA
LEC State
ELAN name
(actual)
ELAN name
(configured)
ELAN type
(actual)
LAN type
(configured)
LES address
Maximum frame
size (bytes)
164
M15-155s8:/>lane lec show
Output from the lane lec show command
Description
The switch's BIA, which will be used as the management
LEC's MAC address, if the LAA address is not set.
The LAA, which will be used as the management LEC's
MAC address if set. If zeros are displayed, the management
LEC will use the BIA.
The operational state of the management LEC.
• Initial State
• LECS Connect
• configure
• join
• initial Registration
• bus connect
• operational - This is the final state of the LEC.
The name of the ELAN that the management LEC is
currently registered with.
The name of the ELAN that the management LEC will
attempt to register with when it is restarted.
The type of ELAN that the management LEC is currently
registered with.
The type of ELAN that the management LEC will attempt to
register with when the LEC is restarted.
The ATM address of the LES where the management LEC
has registered its address.
The maximum frame size that the ELAN can support. The
value is obtained from the LES.
Avaya M770 ATM Switch User's Guide