Listing Bandwidth Information For All Virtual Ports - Avaya M770 User Manual

Listing bandwidth information for all virtual ports

To view bandwidth information for all virtual ports on a module, use the vport
show bandwidth command.
DS3 modules use traffic shaping on virtual ports. Traffic is shaped based on the total
bandwidth assigned to each virtual port. The bandwidth assigned can be seen as
Total BW. For more information see "Traffic shaping for DS3 virtual ports" on page
64.
On non-DS3 modules there is no rate limit shaping. Therefore the maximum
transmit rate for a vport is limited by the capacity of the physical port and not by the
total bandwidth assigned to the vport. .
Command:
Output:
Avaya M770 ATM Switch User's Guide
M4-DS3s8:/>vport show bandwidth status (cells/sec)
Virtual Port Bandwidth status (cells/sec)
----------------------
Total BW
Virtual In
Port ID
8.0.0 34732 34732
1
8.1.0 90118 90118
8.1.3 2358
8.1.5 11792 11792
8.2.0 43980 43980
8.2.3 47168 47168
8.2.4 13120 13120
8.3.0 10426 10426
8
8.4.0 10426 10426
8
Chapter 6
Alloc BW Curr
Out In Out PVPC PVCC SVPC SVCC
0 0 0
1
0 0 0
2358 0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
8
0 0 0
8
Managing Virtual Ports
Curr
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
63