Filter's State; Deleting A Template - Avaya M770 User Manual

Filter's state

A filter may be in one of two states: ON or OFF. When a filter is in the OFF state it is
ignored when testing a call setup and has no effect.:
Command:
Example:
Parameters

Deleting a template

Command:
Example:
Parameters
Avaya M770 ATM Switch User's Guide
Chapter 20
M15-155s8:/> vport sig sigsecurity filter disable <vport>
<priority> <incoming|outgoing>
or:
M15-155s8:/> vport sig sigsecurity filter enable <vport>
<priority> <incoming|outgoing>
M15-155s8:/> vport sig sigsecurity filter disable 9.1.0 10
incoming
<vport> The filter's vport
<priority> The filter's priority - (1..16)
<incoming| The filter's direction (applicable to incoming
outgoing> or outgoing calls)
M15-155s8:/> vport sig sigsecurity filter remove <vport>
<priority> <incoming|outgoing>
M15-155s8:/> vport sig sigsecurity filter remove 9.1.0 10
incoming
<vport> The filter's vport
<priority> The filter's priority - (1..16)
<incoming| The filter's direction (applicable to incoming
outgoing> or outgoing calls)
Signaling Security (Access Control) Commands
255