Avaya M770 Atm Switch User's Guide - Avaya M770 User Manual

Chapter 6 Managing Virtual Ports
Table 6.1
Field
ILMI State
58
Output from the vport show command (Continued)
Description
The ILMI state of the virtual port. The possible ILMI states are:
Inactive
NoContact
CStartSent
GNTimeout
GetRemoteInfo
SwDoRegPrefix
SwWaitAddress
SwHaveAddress The M770 ATM Switch has received the
SwToSwPause
Ready
InterSwitch
NoPrefixes
Disabled
ShuttingDown(Disabled)
The virtual port is disabled or the physical
layer is down.
The physical layer is up but the remote
ILMI entity is not responding.
The M770 ATM Switch is attempting to start
an ILMI dialogue (a cold start trap has been
sent).
The M770 ATM Switch has received no
response to a getnext request from the ILMI
prefix table of the remote device.
The M770 ATM Switch is interrogating the
remote device to determine link
characteristics.
The M770 ATM Switch telling the remote
device about the switch prefix of the M770
ATM Switch.
The M770 ATM Switch has set the prefix
and is waiting to receive the address from
the remote device.
address from the user side.
There is a pause in the ILMI dialogue
between two switches.
ILMI is up on an UNI link (not between two
switches).
ILMI is up on a link between two switches.
ILMI has tried repeatedly to tell the remote
device its prefix without success. It will try
to bring signalling up but remains in this
state.
ILMI is disabled on this port.
Port is in the process of disabling ILMI on
this port.

Avaya M770 ATM Switch User's Guide