Virtual Port Signalling Information - Avaya M770 User Manual

Chapter 6 Managing Virtual Ports

Virtual Port Signalling Information

Virtual port signalling information
To display signalling information for a virtual port, enter the
command.
Command:
Example:
Parameters:
The vport sig stats command displays the high-level statistics (see Table 6.5).
The vport sig stats all command displays all protocol statistics for the
virtual port (see Table 6.6).
Table 6.5
Field
Statistics Info.
Stack up count
Stack down count
Number of restarts
Q.SAAL up count
Q.SAAL down count
Signalling type
Signalling side
80
M15-155s8:/>vport sig stats <vport id> [all]
M15-155s8:/>vport sig stats 8.3.0
The virtual port identifier is displayed as
<vport
<slot>.<port>.<virtual port number>.
id>
Displays all protocol statistics for the virtual port (see Table 6.5).
[all]
If all is omitted, only high-level statistics are displayed (see Table 6.5).
High-level statistical output from the vport sig stats command
Description
The number of times signalling has been started
and stopped on the virtual port.
The number of times signalling has come up since
it was last started on the virtual port.
The number of times signalling has gone down
since it was last started on the virtual port.
The number of times signalling has been restarted
since it was last started on the virtual port.
The number of times Q.SAAL (data link protocol)
has established a link to its peer since it was last
started on the virtual port.
The number of times Q.SAAL (data link protocol)
has lost the connection to its peer since it was last
started on the virtual port.
The signalling version on this virtual port (i.e.,
UNI 3.1)
The signalling profile on this virtual port (i.e.,
Network)
vport sig stats
Avaya M770 ATM Switch User's Guide