Setting The Ilmi Version On A Virtual Port; Resetting The Ilmi Version On A Virtual Port - Avaya M770 User Manual

Chapter 6 Managing Virtual Ports

Setting the ILMI version on a virtual port

This parameter changes the ILMI version used on this vport. By default, this
parameter is ILMI 4.0 which is backwards compatible with devices using ILMI 3.1.
To set the ILMI version on the virtual port use the vport set ilmiver
command.
Command:
Example:
Parameters:

Resetting the ILMI version on a virtual port

If you reset the virtual port's ILMI version parameter, the port will re-learn the ILMI version
when it is enabled and a remote device is connected.
To reset the ILMI version on the virtual port, use the vport reset
ilmiver command.
Command:
Example:
Parameters:
68
M15-155s8:/>vport set ilmiver <vport id> [31 | 40]
M15-155s8:/>vport set ilmiver 8.1.0 31
The virtual port in the form <slot>.<port>.<virtual port number>.
<vport id>
Changes the ILMI Version to ILMI 3.1 or 4.0
[31 | 40]
M15-155s8:/>vport reset ilmiver <vport id>
M15-155s8:/>vport reset ilmiver 8.1.0
The virtual port in the form <slot>.<port>.<virtual port number>.
<vport id>
Avaya M770 ATM Switch User's Guide