Appendix A Default Settings On A New Avaya M770 Atm Switch - Avaya M770 User Manual

Appendix A
Default Settings on a New Avaya M770 ATM Switch
The factory-configured default settings for an Avaya M770 ATM Switch are shown
in Table 1.
Table A.1
System default parameters
Community password
Serial/Telnet password
Date
Time
IP address
SNMP Secure mode
IP for the management LEC
LANE Services default parameters
LECS location
Internal LES
Default Ethernet ELAN
Default Unspecified ELAN
Ethernet LES name
Management LEC status
Management LEC ELAN
Management LEC type
Avaya M770 ATM Switch User's Guide
Default settings for an Avaya M770 ATM Switch
PUBLIC
No password
01-JAN-1970
00:00:00
Will use BOOTP to obtain an IP address.
Disabled
Enabled
Remote at WKA
Enabled
default
default
The above ELAN is used when the name and
type of ELAN is not given.
default
Enabled
Will join the "default" ELAN.
Ethernet
267