Controlled Shutdown Of The Switch - Avaya M770 User Manual

Appendix B Using BOOT Loader

Controlled shutdown of the switch

This command is used for a controlled shutdown of a module, any connections that
still remain on that module will be lost. A warning to this effect is displayed and
confirmation is requested before the module is powered down.
To carry out a controlled shutdown of the switch in preparation for a power down,
use the system halt command.
Command:
Output:
Note: This command should be carried out before the M770 ATM Switch has its
power disconnected.
284
M15-155s8:/>system halt
This will stop the module, losing all
connections - do you want to continue (y/n)?
Avaya M770 ATM Switch User's Guide