Avaya C360 Default Settings - Avaya C360 Quick Start For Hardware Installation

Prepare for Configuration
Configuring the Switch

Avaya C360 Default Settings

The default settings for the Avaya C360 switch and its ports are determined by the Avaya C360
firmware. These default settings are subject to change in newer versions of the Avaya C360
firmware. See the C360 Release Notes for the most up-to-date settings.
Table 4: Default Switch Settings
Function
IP address
Subnet Mask
Default gateway
Management VLAN ID
Spanning tree
Bridge priority for Spanning Tree
Spanning tree version
MAC aging
MAC aging time
Keep alive frame transmission
Network time acquisition
IP multicast filtering
802.1X system-auth-control
802.1X port-control
RADIUS server
Time server IP address
Timezone offset
SNMPv1 communities:
Read-only
Read-write
Trap SNMP
SNMP authentication trap
CLI timeout
System logging
20 Quick Start for Hardware Installation: Avaya C360 Converged Stackable Switch
Default Setting
149.49.32.134
255.255.255.0
0.0.0.0
1
Enabled
32768
Common spanning tree
Enabled
5 minutes
Enabled
Enabled, Time protocol
Disabled
Disabled
Auto
Disabled
0.0.0.0
0 hours
Public
Public
Public
Disabled
15 Minutes
Disabled
1 of 2
May 2004