Table of Contents
Advertisement
Tracking Satellites Indicator
Once a connection is established, the number and type of satellites being tracked display in the upper left
corner of Connect's Constellation window.
The Solution Status is also indicated as computed in the Position window.
Entering Commands
Commands can be sent to the receiver using the NovAtel Connect Console window (found under View
menu if not displayed by default). Enter commands in the text box at the bottom of the Console window.
Note the following when entering commands:
•
Logs can be requested in three formats: ASCII (e.g., log BESTPOSA), Abbreviated ASCII (e.g., log
BESTPOS) and Binary (e.g., log BESTPOSB). Abbreviated ASCII is the best format to use when
working directly with the receiver. For data collection, use ASCII or Binary.
•
Press ENTER to send the command string to the receiver. Commands are not case sensitive.
Refer to the
the list of available commands and logs and the parameters to use.
POST PROCESSING
Post-mission data processing refers to cases where GNSS data collected by the receiver is processed
after the entire data collection session is complete.
ProPak6 output is compatible with post-processing software from NovAtel's Waypoint
For details, see
www.novatel.com/Products/Waypoint
OEM6 Family Firmware Reference Manual
(OM-20000129) for
Software.
®
Products Group.
7
Advertisement
Table of Contents
