Calling The Quick Menu; Possible Functions Of The Quick Menu - Dräger X-AM 5000 Technical Manual

Operation

Calling the Quick Menu

−
Only the fresh air calibration is activated in the quick menu on delivery. The PC soft-
ware Dräger CC Vision can be used to activate the bump test for the quick menu
and/or the function for displaying and deleting peak values.
•
In measuring mode, press the
If no functions have been activated in the quick menu, the device remains in measu-
ring mode.
−
You can select the activated functions of the quick menu by pressing the
•
Press the key to call the selected function.
OK

Possible functions of the quick menu

Function test with gas (bump test), refer to page 32
Fresh air calibration, refer to page 38
Displaying and deleting peak values, see below
•
Press the key to cancel the active function and to switch to measuring mode.
− If no key is pressed for 60 seconds, the device returns automatically to measuring
mode.
16
key three times.
key.