Dräger X-AM 5000 Technical Manual page 47

1
•
Attach additional charging modules in the same way.
−
Always connect or disconnect the charging modules individually and not in groups
in order to prevent the charging station from becoming damaged. During transpor-
tation, the power pack and the charging modules should also always be handled in-
dividually and without inserted devices.
• Position the device on an even and level surface.
•
Connecting the power pack to the
mains.
1 The green "Mains" LED lights.
•
Insert the device into the charging
module.
2 Display LED on the charger:
If a fault occurs:
Remove the device from the charging
module and insert it again.
If the fault still occurs, have the charging
module repaired.
It takes approx. 4 hours to fully charge an
empty rechargeable battery.
A short circuit of the charging contacts in the charging modules, e.g., by metallic
objects that have fallen in, does not result in damage to the charging station. It should,
however, be avoided due to possible heating hazards and incorrect displays on the
charging module.
2
1
X-am 5000
Ex
%LEL
CO
2
ppm
O
2
Vol%
CO
ppm
H S
2
ppm
NH
3
ppm
0
Charge
Fault
Full
2
1
X-am 5000
Ex
%LEL
CO
2
ppm
O
2
Vol%
CO
ppm
H S
2
ppm
NH
3
ppm
0
1 3
Maintenance
2
1
X-am 5000
Ex
%LEL
CO
2
ppm
O
2
Vol%
CO
ppm
H S
2
ppm
NH
3
ppm
0
X-am 5000
Ex
%LEL
CO
2
ppm
O
2
Vol%
CO
ppm
H S
2
ppm
NH
3
ppm
0
2
47