Toshiba strata DK8 Installation Instructions Manual page 353

PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECORDS
SECTION lOO-816-302
MARCH1993
PROGRAM45-3-6
EQUALACCESS/SPECIALCOMMONCARRlER(SPCC)NUMBERSANDAUTHORlZATlONCODEDlGlT
LENGTH
SELECT
= Item 3-6 -I
Enter Item number
3-6 from table below.
LDATA =
First five digits of the
SPCC Number, or digit
length specified in the
table below. See Note 3.
Item
Description
1 st five digits of SPCC
Data =
Number or
Digit Length
3
SPCCl Number
q 00[70 (
4
Authorization Code 1
Digit Length (00 - 99)
I q l
I
5
I
SPCC2
6
Authorization Code 2
Digit Length (00 - 99)
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. initialized data assigns "00" data to items 4 and 6, and assigns blank data to
items 3 and 5.
3. When editing,
l
Press # to move cursor.
l
Press Button/LED 01 to delete or leave a blank.
l
Press Button/LED 02 for don't care.
4. Do not enter a digit length greater than necessary or Toll Restriction may be
able to be defeated.
5. This program is designed for the following special Common Carrier access
dialing sequence: SPCC Number + Authorization Code + Telephone Number
(950XxXx). SMDR willprintout the following: SPCC Number+----+ Telephone
Number. (The Authorization Code willnotprintout, and fourdashes ("----I') will
be in its place.) Toll Restriction will start on the first digit of the Telephone
Number.
2-103