Toshiba strata DK8 Installation Instructions Manual page 265

Hide thumbs Also See for strata DK8:
Table of Contents

Advertisement

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM
RECORDS
SECTION 100-816-302
MARCH 1993
0
same
VM group.
The purpose
of the VM
grouping
is to allow efficient
use of the mes-
sage waiting set and cancel operations
from
the VM machines.
Since each digital and
electronic
telephone
can only have a maxi-
mum of four messages
waiting, the voice mail
device should set MW only once, regardless
of how many messages
there are.
Voice Mail (VM) to VM Call Blocking,
LED
04-This
prevents
VM/auto
attendant
ports
from call forwarding
to other VM ports during
screened
or supervised
VM transfers.
If VM/
auto attendant
calls are screened
or super-
vised, this LED should be ON for all VM/auto
attendant
ports; if VM/auto
attendant
calls
are blind transferred,
this LED should
be
OFF for all VM/auto
attendant
ports.
Off-hook
Call Announce
(OCA) Enabled
(Receive),
LED
03-Any
digital
or elec-
tronic telephone
equipped
for OCA should
be assigned
this option.
If assigned,
the
station will be allowed
to receive OCA. This
program
does not affect the station's
ability
to originate
OCA.
Handsfree
No Warning,
LED
02-Nor-
mally, a one-second
warning
tone is sent to
a handsfree
digital or electronic
telephone
to inform the user that someone
is calling
and that they can be heard.
If the warning
tone is not desired
at the called digital or
electronic
telephone,
this assignment
can
disable
it. This will also prevent
ringing the
digital or electronic
telephone
as a ring-first
situation,
allowing
silent room monitoring
of
the area surrounding
the telephone.
Initial-
ized data activates
the warning
tone for all
ports.
Handsfree
Disabled,
LED 01-It
is possible
to disable the intercom handsfree
function on
any digital or electronic
telephone.
Program
32-Automatic
Preference:
Automatic
Preference
for digital or electronic
telephones
(see Note) via handset
off-hook
or the Spkr
button is the automatic
connection
to CO lines or
intercom
under various
conditions.
With Ring-
ing Line Preference,
a digital or electronic
tele-
phone
going off-hook
(or pressing
the Spkr
button)
may be automatically
connected
to the
lowest CO line ringing in without
having to press
a CO line button or dial an access code. If no CO
lines are ringing and a digital or electronic
tele-
phone
goes off-hook,
the station
can be auto-
matically
connected
to intercom
or to a CO line.
The CO line connected
can be the lowest num-
bered CO line available
on the telephone
or the
highest
idle CO line from a selected
group (1 -
8).
NOTE:
This program
does
not apply
to standard
telephones.
To allow system
features
to be
accessed,
standard
telephones
always
re-
ceive system
intercom
dial tone when origi-
na ting calls.
Program
33-Station
Hunting
(Voice
Calls
Only): If astation
is busy, Station Hunting
allows
the ringing of an alternate
station as defined
by
the assignments
in this program.
If the "hunt-to"
station is busy, the system will try to ring the next
"hunt-to"
station,
and so on. If a "hunt-to"
station
is in the Call Forward
mode,
the Call Forward
overrides
the hunt. A CO Line will hunt from a
station only if it has been assigned
to ring at that
station exclusively
(see Programs
81 - 89).
Program
34-Hold/Park
Recall
Timing:
Each
station
can have a different
time (from 011 to
160 seconds)
for Hold/Park
Recall. The time is
the duration
between
the point when the call is
placed on hold or parked and the point when the
held or parked
should
recall the station
that
placed it on hold or parked
it.
Program
35-Station
Class
of Service:
l
Busy
Station
Transfer
with
LED 20 and
Busy Station
Ringing
with LED 19-Busy
Station
Transfer
(BST) and Busy Station
Ringing
(BSR) operate
together
to ensure
that a busy digital or electronic
telephone
station always
receives transferred
CO line
calls along with LED and tone indications.
The station
or Voice mail (VM)/auto
atten-
dant device that transfers
the call must be
programmed
with BST (LED 20 ON) and the
one that receives
it must have BSR (LED
19). When a busy station with BSR receives
a transfer
from a station
or VM/auto
atten-
dant with BST, there will be a muted repeti-
tive tone (1 second
ON, 3 seconds
OFF) at
the busy station
and the intercom
LED will
flash
at the ringing
rate until the station
2-15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Strata dk16

Table of Contents