Toshiba strata DK8 Installation Instructions Manual page 318

PROGRAMMINGPROCEDURES-INSTRUCTIONWSYSTEMRECOROS
SECTION lOO-816-302
MARCH1993
PROGRAM 34
HOLD/PARK RECALL TIMING
T
SELECT = Logical Port Number (00- 19)
-HOLD TIME = Seconds
Enter the port number having
Enter the number of seconds the
its Hold/Park Recall Time defined.
system will wait. Use three digits.
See Note 4 for entering a
Acceptable range is 000 or
range of ports.
01 l-160. See Note 3.
NOTE: Shaded areas apply to DK16 only
Logica'
Port
00 01 02 03 04
05 06 07 08 09 10 11 12 13 14 15
Seconds
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data assigns a Hold/Park recall time of 032 seconds to all ports.
3. Enter 000 for no Hold/Park recall. Enter 011 - 160 for 11 to 160 seconds.
4. Enter a range of ports by keying in the following sequence:
Low port -I
L High port
2-70