Toshiba strata DK8 Installation Instructions Manual page 331

PROGRAMMINGPROCEDURES-INSTRUCTIONWSYSTEMRECOROS
SECTION lOO-816-302
MARCH1993
PROGRAM42-1-8
PBX/CENTREXACCESSCODES
SELECT = l-8 -
LACCESS CODE = -
PBX Access Code Group Enter a Z-digit access
Enter the PBX Group code for the group,
number 1 - 8 that needs as defined by the tab/e
NOTES:
an access code assigned. below. See Note 3.
PBXKENTREX
PBWCENTREX Outgoing Trunk
Access Code
Access Code(s)
Number
1st digit
2nd digit
1
2
3
4
5
6
7
8
1. For more information, see the instructions preceding the record sheets.
2. Initialized data assigns no access codes to PBX groups.
3.
l
If access code is single digit, enter the first digit and press Button/LED 01 as
second digit.
l
Press Button/LED 01 to delete a digit.
l
Press Button/LED 02 for don't care. For example, pressing 8 + Button/LED
02 allows 80 - 89.
4. This program must be utilized to allow correct Toll Restriction and CENTREX
PBX transfer operation.
2-81