Toshiba strata DK8 Installation Instructions Manual page 240

PROGRAMMINGPROCEDURES-INTRODUCTION
SECTION 100-816-301
MARCH1993
more data
p-pq-qqp-JplpfJ$=Jjpjp-pl
Enter programming mode A
SELECT = (as below) d
Specify if initializing Station Speed Dial,
System Speed Dial, Character Message
END Program 92
Memory, Timed Reminders, or Digital
Telephone Volume Levels:
EXIT programming mode
Clears Station Speed Dial, Voice Mail ID Codes,
and LCD memos Assigned to Station Speed Dial numbers.
q 3$zJ$iJ
Clears System Speed Dial and LCD memos assigned to
System Speed Dial numbers.
q JEJ@
Clears LCD Character Message Memory (Station and System).
pJ-J%J@
Clears Timed Reminders.
Initialize Digital Telephone Ring/Speaker, Mute Ring,
and Intercom Tone/BGM volume levels.
Clears Call Forward Memory and resets
call forward indications on telephones.
FIGURE 1-4
INITIALIZING SPEED DIAL NUMBERS, VM ID CODES, CHARACTER MESSAGE MEMORY, TIMED
REMINDERS, DIGITAL TELEPHONE VOLUME, AND CALL FORWARD BACKUP MEMORY WITH
PROGRAM 92
l-10