Toshiba strata DK8 Installation Instructions Manual page 351

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
PROGRAM45-1
LWTOLLRESTRICTION DIALPLAN
SELECT= 11 T DATA = Plan 1 - 5
Enter codes I - 5 to indicate
the dial plan for the system.
X
Plan
Toll Restriction/LCR
Dial Plans
5
4
3
17
2 /I
1
0+ (Note 6)
Universal (Note 6)
1 +AC+NXWNNX
1 +AC+NXX/l +NNX (Note 7)
AC+NXX/I +NNX (Note 7)
IMPORTANT:
The correct Dial Plan must be assigned to allow system LCR and/or Toll
Restriction to function properly.
NOTES:
1. Initialized data assigns Dial Plan Code 7 to the system.
2. InNXXandNNX,X=O-9, N=2-9.
3. NXX = Office code (interchangeable; 2nd digit can be 1 or 0).
4. NNX = Office code (not interchangeable; 2nd digit cannot be 1 or 0).
5. AC = Area Code.
6. 0+ and Universal (Codes 5 + 4) are not used in USA.
7. I+ NNX indicates 1 may be dialed before office codes.
2-101