Toshiba strata DK8 Installation Instructions Manual page 302

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
PROGRAM 10-3
SYSTEM ASSIGNMENTS, PART 3 OF 3
rsl-~ln~~-~l~-~~l-~l-~
SELECT
= 3 I-
-L Button LEDs
Light LEDs as defined by the table below.
ALL LEDs with an "x" should be lit when you finish.
NOTE: Shaded areas apply to DK16 only
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data: all LEDs off.
3. See Section 100-816-208 for connecting two-way amplifiers for use on tandem, DISA, and conference telephone calls.
4. See Program 10-2 (LEDs 18 and 19), Program 10-l (LEDs 19 and20), and Program 15-5 formore information regarding
two CO line conference/tandem.
5. The amplifier, which is switched to two CO line calls automatically, is accessed on a first-come-first-serve basis. Two CO
line calls established while the amplifier is already being accessed will not be amplified.
6. QSMU option is for DK8 only.
2-54