Toshiba strata DK8 Installation Instructions Manual page 345

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
PROGRAM 93
CO LINE IDENTIFICATION
CO Line Identification
the CO line being named.
See Note 2.
is the maximum.)
See Note 3 for LCD message editing.
NOT
E
LEt
08
.E: Shaded areas apply to DK16 only
co
1 Line
CO Line Identification (16 Characters Max. - Enter One Per Square)
(08)
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data assigns no identification message to CO lines.
3. Special editing buttons include: # to toggle between alpha and numeric modes;
1 moves cursor to right;
* moves cursor to left;
0 increments letters, etc.
For more detailed editing instructions, see the following page.
2-95