Toshiba strata DK8 Installation Instructions Manual page 306

PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECORDS
SECTION lOO-816-302
MARCH1993
PROGRAM16
ASSIGNING CO LlNEGROUPS(DIAL9 OR81-88)
SELECT = CO Line Group1
l-- Button/L EDs
Only enter the last digit of
Specify which CO lines are assigned to the
the CO line group (1 - 8) to group by setting LEDs as defined by the table
be defined, or enter 0 for Dial 9 group. below. All LEDs with an 'x" should be lit
when finished. See Note 2.
NOTE: Shaded areas apply to DK16 only
NOTES:
1. For more information,
see the instructions preceding the record sheets.
2. Initialized data assigns all CO lines to the Dial 9 group.
2-58