Toshiba strata DK8 Installation Instructions Manual page 311

PROGRAMMINGPROCEDURES-INSTRUCTIONSBYSTEMRECORDS
SECTION 100-816-302
MARCH1993
PROGRAM 28
DK16 DSS CONSOLE/ATTENDANT TELEPHONE ASSIGNMENTS
SELECT= (1-J -Lssnrr= (I-2)
Enter the DSS Enter the attendant digital or electronic
console number. telephone number. See Note 5.
See Note 4.
I
DSS Console
Base Unit/Expansion Unit PCB Slot (DDSWHDSS)
Attendant Digital / Electronic
(Lowest Slot to Highest) Number
Telephone Number (1 or 2)
Base Unit (Digital Circuits):
1
I
IExpansion Unit PCB (PEKU or PDKU): ) 2
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. A digital DDSS console can be assigned to an electronic telephone, and an HDSS console can be assigned to a digital telephone.
3. Refer to Program 03, Flexible PCB Slot Assignments, for the PEKU, PDKU, Base Unit slots configured to support consoles.
4. If more than one console is associated with one attendant telephone, then specify the same number attendant telephone for both
consoles associated with it.
5. Initialized data assigns console #1 to attendant telephone #l and console #2 to attendant telephone #2.
6. DSS consoles are not available on DK8.
2-63