Removing Steering Controller; Rops Model - Kubota M8540 Workshop Manual

M8540, M9540, WSM

[2] REMOVING STEERING CONTROLLER

(1) ROPS Model

Bonnet
1. Open the bonnet (1) and disconnect the battery negative
terminal.
2. Disconnect the connectors (2) for head lights.
3. Disconnect the dampers (3).
4. Remove the bonnet (1).
IMPORTANT
• When disconnecting the battery cables, disconnect the
grounding cable first. When connecting, positive cable first.
(1) Bonnet
(2) Connector
Panel Cover
1. Remove the steering port cover (6).
2. Detach the panel cover (1).
3. Disconnect the connectors for main key switch (5), FS switch (2),
hazard switch (3), panel change switch (4) and combination
switch (7).
4. Remove the panel cover (1).
(1) Panel Cover
(2) FS Switch
(3) Hazard Switch
(4) Panel Change Switch
7-S5
STEERING
(3) Damper
W1013836
(5) Main Key Switch
(6) Steering Port Cover
(7) Combination Switch
W1014438
KiSC issued 09, 2008 A