Servicing; 4Wd Model - Kubota M8540 Workshop Manual

Hide thumbs Also See for M8540:

Table of Contents

M8540, M9540, WSM

[3] SERVICING

Ball Bearing

1. Hold the inner race, and push and pull the outer race in all

directions to check for wear and roughness.

2. Apply transmission fluid to the bearing, and hold the inner race.

Then, turn the outer race to check rotation.

3. If there is any defect, replace it.

Needle Bearing

1. Check the needle bearing for abrasion, color, change or other

2. If there is any doubt as to the condition of a needle bearing,

KiSC issued 09, 2008 A

Table of Contents