Kubota M8540 Workshop Manual page 150

M8540, M9540, WSM
Cover, Oil Cooler Pipe, Fuel Hoses, Accelerator Wire and Wire
Harness for R.H. Side
1. Disconnect the fuel hose (2) from separator and fuel overflow
hose (6).
2. Disconnect the oil cooler pipe retaining nut (3).
3. Disconnect the wire harness from air heater (3), engine stop
solenoid (4) and engine speed sensor (7).
4. Disconnect the accelerator wire (5).
(When reassembling)
• Be sure to assemble the accelerator wire cover.
Oil cooler pipe retaining
nut
Tightening torque
Intake air heater terminal
mounting nut
(1) Oil Cooler Pipe Retaining Nut
(2) Fuel Hose
(3) Air Heater
(4) Engine Stop Solenoid
Muffler, Radiator Hose and Air Cleaner Hose
1. Remove the muffler pipe stay (4) and remove the muffler (3) with
muffler pipe.
2. Disconnect the air cleaner hose (1).
3. Disconnect the radiator upper hose (2) and lower hose (5).
4. Disconnect the 1P connectors (7) from the air cleaner switch.
(1) Air Cleaner Hose
(2) Radiator Upper Hose
(3) Muffler
(4) Muffler Stay
1-S27
ENGINE
49 to 68 N·m
5.0 to 7.0 kgf·m
37 to 50 lbf·ft
3.5 to 5.3 N·m
0.35 to 0.55 kgf·m
2.6 to 3.9 lbf·ft
(5) Accelerator Wire
(6) Overflow Hose
(7) Engine Speed Sensor
W1058342
(5) Radiator Lower Hose
(6) Air Cleaner Switch
(7) 1P Connector
W1020518
KiSC issued 09, 2008 A