Kubota M8540 Workshop Manual page 397

M8540, M9540, WSM
Front Bracket and Rear Bracket Bushing
1. Visually inspect the DX bushings for signs of wear or damage.
(The DX bushing tends to show concentrated wear.)
2. If the DX bushing is worn beyond the alloy portion (L), replace it.
Front bracket and rear
Alloy thickness (L)
bracket bushing
Rear differential case
Factory spec.
boss O.D.
Front differential case
Factory spec.
boss O.D.
Bearing Retainer and Front Wheel Case Support Bushing
1. Visually inspect the DX bushings for signs of wear or damage.
(The DX bushing tends to show concentrated wear.)
2. If the DX bushing is worn beyond the alloy portion (L), replace it.
Front wheel case
Alloy thickness (L)
support bushing
Bearing retainer O.D. Factory spec.
6-S19
FRONT AXLE
0.57 mm
0.0224 in.
109.965 to 110.000 mm
4.32933 to 4.33071 in.
79.965 to 80.000 mm
3.14823 to 3.14961 in.
W1020171
0.57 mm
0.0224 in.
59.97 to 60.00 mm
2.36102 to 2.36220 in.
W1020339
KiSC issued 09, 2008 A