Checking, Disassembling And Servicing; Disassembling And Assembling; Removing Steering Controller - Kubota ME8200DTN Workshop Manual Supplement

ME8200DTN, WSM

2. CHECKING, DISASSEMBLING AND SERVICING

[1] DISASSEMBLING AND ASSEMBLING

(1) Removing Steering Controller

Bonnet
1. Remove the bonnet (1).
2. Disconnect the battery's cable.
(1) Bonnet
Steering Wheel, Meter Panel and Rear Bonnet
1. Remove the steering wheel (1) with a steering wheel puller
(Code No. 07916-51090).
2. Remove the shuttle lever grip (8).
3. Remove the meter panel mounting screws and open the meter
panel (2).
4. Disconnect the two connectors (3) and meter cable (4).
5. Disconnect the main switch connector (5) and combination
switch connector (6).
6. Disconnect the hazard switch connector (9), 4WD / Bi-speed
switch connector (12) and 4WD indicator connector (13).
7. Disconnect the engine stop cable (7) at the engine side.
8. Remove the rear bonnet (10) and lower cover (11).
(1) Steering Wheel
(2) Meter Panel
(3) Connector
(4) Meter Cable
(5) Main Switch Connector
(6) Combination Switch Connector
(7) Engine Stop Cable
N7-S2
STEERING
(2) Battery
0000003540E
(8) Shuttle Lever Grip
(9) Hazard Switch Connector
(10) Rear Bonnet
(11) Lower Cover
(12) 4WD / Bi-speed Switch
Connector
(13) 4WD Indicator Connector
0000003412E
KiSC issued 04, 2006 A