Kubota M8540 Workshop Manual page 459

M8540, M9540, WSM
Preparation 2
1. Remove the trailer brake outlet pipe (1) with a holder (2).
(1) Trailer Brake Outlet Pipe
(2) Holder
Removing Top Cover (3-Point Hitch Hydraulic Block)
1. Remove the top cover mounting screws and nuts.
2. Take out the top cover assembly.
(When reassembling)
• Apply liquid gasket (Three Bond 1206C or equivalent) to joint
face of transmission case and top cover.
NOTE
• After reassembling the top cover assembly to the tractor, be
sure to adjust the position and draft levers and position and
draft feedback rods.
• Top cover mounting screw has two different length, be sure
to assemble the original position.
Top cover mounting screw
(M14, 9T)
Tightening torque
Top cover mounting nut
(M14, 7T)
8-S22
HYDRAULIC SYSTEM
(3) Trailer Brake Valve
W1017715
166.7 to 196.1 N·m
17.0 to 20.0 kgf·m
123.0 to 144.7 lbf·ft
123.6 to 147.1 N·m
12.6 to 15.0 kgf·m
91.1 to 108.5 lbf·ft
W1019417
KiSC issued 09, 2008 A