Kubota M8540 Workshop Manual page 25

M8540, M9540, WSM
• Securely insert grommet.
(1) Grommet
• Securely clamp, being careful not to damage wiring.
(1) Clamp
• Wind Clamp Spirally
(2) Wire Harness
• Clamp wiring so that there is no twist, unnecessary sag, or
excessive tension, except for movable part, where sag be
required.
(1) Wiring
(2) Clamp
• In installing a part, take care not to get wiring caught by it.
(1) Wiring
• After installing wiring, check protection of terminals and clamped
condition of wiring, only connect battery.
(1) Cover
• Securely Install Cover
G-6
G GENERAL
(A) Correct
(B) Incorrect
W1011388
(3) Clamp
(4) Welding Dent
W1011458
(A) Correct
(B) Incorrect
W1011587
(A) Incorrect
W1011670
W1011735
KiSC issued 09, 2008 A