M8540, M9540, WSM
(7) Gear Lock Brake Gear
• Separating transmission case and clutch housing case, refer to "5. DISASSEMBLING AND ASSEMBLING" at "3.
TRANSMISSION" section.
Bearing Holder and Speed Sensor
1. Remove the speed sensor (4).
2. Remove the external circlip (3) and 33T gear (2).
3. Remove the bearing holder mounting screws, and take out the
bearing holder (1).
If the shaft comes out with bearing holder, tap in the shaft during
take out the bearing holder (1).
(When reassembling)
• Apply transmission fluid to the O-ring of speed sensor (4).
• Be sure to fix the gear lock brake arm (6) and gear lock cam lever
(5).
(1) Bearing Holder
(2) 33T Gear
(3) External Circlip
5-S19
BRAKES
(4) Speed Sensor
(5) Gear Lock Cam Lever
(6) Gear Lock Brake Arm
W1019332
KiSC issued 09, 2008 A