M8540, M9540, WSM
(3) Front Axle Rocking Restrictor
(4) Bonnet (ROPS Model)
Front Axle Rocking Rectrictor
1. Install the front axle rocking restrictor (1) (refer to "8. SPECIAL
TOOL" at "G. GENERAL" section) to the front axle bracket on
both side.
(1) Front Axle Rocking Restrictor
Bonnet
1. Open the bonnet (1) and disconnect the battery negative
terminal.
2. Disconnect the connector (2) for head lights.
3. Disconnect the damper (4).
4. Remove the bonnet (1) and side cover (2) for both side.
IMPORTANT
• When disconnecting the battery cables, disconnect the
grounding cable first. When connecting, positive cable first.
(1) Bonnet
(2) Connector
3-S20
TRANSMISSION
W1063409
(3) Side Cover
(4) Damper
W1017565
KiSC issued 09, 2008 A