Kubota M8540 Workshop Manual page 153

M8540, M9540, WSM
Muffler Pipe
1. Remove the muffler pipe (1).
(1) Muffler Pipe
Hydraulic Pipes, Hoses and Heater Hoses
1. Disconnect the power steering delivery hose 1 (3) and 2 (1) from
controller (4).
2. Disconnect the master cylinder hose (7) and master cylinder
return hose (5) from the brake master cylinder (6).
3. Remove the accelerator wire (9).
4. Remove the fuel hose (8) and fuel return hose (10).
5. Disconnect the oil cooler return pipe retaining nut (11).
(When reassembling)
• Be sure to assemble the power steering delivery hose to original
position. (The power steering hose with blue tape (2) fix to rear
joint.)
Power steering delivery
hose 1 and 2 retaining nut
Master cylinder hose and
Tightening torque
return hose retaining nut
Oil cooler return pipe
retaining nut
(1) Power Steering Delivery Hose 2
(2) Blue Tape
(3) Power Steering Delivery Hose 1
(4) Controller
(5) Master Cylinder Return Hose
(6) Brake Master Cylinder
1-S30
ENGINE
W1095571
23 to 27 N·m
2.3 to 2.8 kgf·m
17 to 20 lbf·ft
23 to 27 N·m
2.3 to 2.8 kgf·m
17 to 20 lbf·ft
49 to 68 N·m
5.0 to 7.0 kgf·m
37 to 50 lbf·ft
(7) Master Cylinder Hose
(8) Fuel Hose
(9) Accelerator Wire
(10) Fuel Hose (Return)
(11) Oil Cooler Return Pipe Retaining
Nut
W1095987
KiSC issued 09, 2008 A