Hydraulic Shuttle Valve; Solenoid Valve Assembly - Kubota M8540 Workshop Manual

M8540, M9540, WSM

(3) Hydraulic Shuttle Valve

(4) Solenoid Valve Assembly

Shuttle Valve Assembly
1. Disconnect the shuttle cable (1).
2. Disconnect the clutch cable (2) and spring (3).
3. Remove the shuttle valve pipe (6).
4. Remove the external circlip (5) and plate (4).
5. Disconnect the neutral switch 1P connectors (8).
6. Remove the shuttle valve assembly (7).
(When reassembling)
• Be sure to fix the O-ring (10) and (9) in position as shown photo
and apply transmission fluid.
• Adjust the clutch pedal free travel (refer to "CHECKING AND
ADJUSTING" in this section).
• Turn the mark (11) to outward.
Shuttle valve pipe retaining
nut
Tightening torque
Shuttle valve mounting
screw
(1) Shuttle Cable
(2) Clutch Cable
(3) Spring
(4) Plate
(5) External Circlip
(6) Shuttle Valve Pipe
Solenoid Valve Assembly
1. Remove the I-joint screw (delivery pipe) (2) and differential lock
(1).
2. Remove the return pipe (4) for F36/R36 speed transmission
model.
3. Disconnect the connector (3).
4. Remove the solenoid valve assembly (5).
(When reassembling)
• Apply transmission fluid to the O-rings (6).
• Apply liquid gasket (Three Bond 1208D or equivalent) to joint
face of transmission case and solenoid valve assembly.
Joint screw for hydraulic
pipe
Tightening torque
Return pipe retaining nut
(1) Pipe (Differential Lock)
(2) Pipe (Delivery)
(3) Connector
3-S17
TRANSMISSION
49.0 to 68.6 N·m
5.0 to 7.0 kgf·m
36.2 to 50.6 lbf·ft
23.5 to 27.5 N·m
2.4 to 2.8 kgf·m
17.4 to 20.2 lbf·ft
(7) Shuttle Valve Assembly
(8) 1P Connector for Neutral Switch
(9) O-ring
(10) O-ring
(11) Mark
(12) Shuttle Spool
W1015835
29.4 to 34.3 N·m
3.0 to 3.5 kgf·m
21.7 to 25.3 lbf·ft
22.6 to 27.5 N·m
2.3 to 2.8 kgf·m
16.6 to 20.3 lbf·ft
(4) Return Pipe
(5) Solenoid Valve Assembly
(6) O-ring
W1016680
KiSC issued 09, 2008 A