Anritsu MT9083 Series Operation Manual page 81

4.5.10 TRACe:HEADer Command
Syntax: TRACe:HEADer<wsp><Data Flag>,<Cable ID>,<Fiber ID>,<Cable Code>,
<Start location>,<Terminal Location>,<Direction>,<Operator>,<Comment>
Parameters: <Data Flag>
<Cable ID>
<Fiber ID>
<Cable Code>
<Start location>
<Terminal Location>
<Direction>
<Operator>
<Comment>
Description: Set Trace Header. If set to blank, parameter is no characters.
But <Data Flag> and <Direction> cannot be blank (Always set).
If you want to set blank in <Comment>, add a comma at the last argument.
Example:
trac:head OT,1,1,ABC,Tokyo,Yokohama,1,Anritsu,TEST
trac:head BC,,,,,,0,,,
Response: None.
Errors: (-108, "std_tooManyParameters, Parameter not Allowed")
(-109, "std_tooFewParameters, Missing Parameter")
(-224, "std_illegalParmValue, Invalid Parameter Value")
4.5.11 TRACe:HEADer? Command
Syntax: TRACe:HEADer?
Parameters: None.
Description: Get Trace Header
Example: trac:head? --- OT, 1, 1, ABC, Tokyo, Yokohama, 1, Anritsu, TEST<END>
Response: Nine header.
Errors: (-108, "std_tooManyParameters, Parameter not Allowed")
4.5
BC, RC, OT
Up to 30 characters
Up to 30 characters
Up to 30 characters
Up to 30 characters
Up to 30 characters
0: A->B, 1-> B->A
Up to 30 characters
Up to 30 characters
TRACe Subsystem Commands
4
4-29