Chapter 2 Before use
2.2.2 Connecting External Equipment
2-4
Connect the external equipment with a LAN cable to the LAN port of the
USB-Ethernet converter connected to the instrument. Use a crossover
cable to connect one PC controller. When connecting multiple pieces of
external equipment, use a network hub.
PC
Figure 2.2.2-1 Connecting One External PC
PC
Figure 2.2.2-2 Connecting Multiple Pieces of External Equipment
Note:
Sometimes communications with the ACCESS Master are not
established due to the external equipment communications status.
For stable communications, connect directly using a crossover
cable.
Cross cable
Network hub
Straight cable
External device