Anritsu MT9083 Series Operation Manual page 62

Chapter 4 OTDR Commands
4.3.4 SOURce:RANge:AVAilable? Command
Syntax: SOURce:RANge:AVAilable?
Parameters: None
Description: Queries the list of available ranges for current wavelength settings.
Example: sour:ran:ava? --- 5.0, 10.0, 20.0, 50.0, 100.0, 200.0, 300.0<END>
Response: List of available ranges in kilometers (KM).
Errors: None
4.3.5 SOURce:RANge Command
Syntax: SOURce:RANge<wsp><value>
Parameters: <value>
Numeric format
Range: Model dependent, numeric value returned by available ranges query
command
Description: Set current range
Example: sour:ran 100
Response: None
Errors: (–200, "std_execGen, Test is Active")
(–224, "std_illegalParmValue, Invalid Parameter Value")
4.3.6 SOURce:RANge? Command
Syntax: SOURce:RANge?
Parameters: None
Description: Query current range.
Example: sour:ran? --- 50.0<END>
Response: The value is current range in kilometers (KM).
Errors: None
4.3.7 SOURce:RESo:AVAilable? Command
Syntax: SOURce:RESo:AVAilable?
Parameters: None
Description: Queries the list of available resolution flags for current range settings.
Example: sour:res:ava? --- 0, 1, 2<END>
Response: List of available resolutions: 0-Low Density, 1-High Density, 2-Very High Density
Errors: None
4-10