Chapter 3 Platform SCPI Commands
3.2.5 SYSTem:LIGHt?
Syntax:
SYSTem:LIGHt?
Description:
Checks if the backlight is turned ON or OFF.
Parameters:
None
Response:
Possible responses are:
0 = The backlight is OFF.
1 = The backlight is ON.
Example:
SYST:LIGH? -> 0<END>
3.2.6 SYSTem:LIGHt
Syntax:
SYSTem:LIGHt<wsp><value>
Description:
Sets the backlight on the system ON or OFF.
Parameters:
<value>
Boolean format
Range: 0|1
0 = Turn the backlight OFF on the unit.
1 = Turn the backlight ON on the unit.
Response:
None
Example:
SYST:LIGH 1<END>
3-10