Chapter 2 Before use
2.1 Preparing Equipment
2-2
The following equipment is required to perform remote control.
PC
USB-Ethernet converter
Ethernet cable
Program development tools
PC
The PC must be able to run the program development tools.
USB-Ethernet converter
We recommend using the Anritsu USB-Ethernet converter, which is
confirmed as working. Other commercial converters can be used but some
may have compatibility problems.
Appendix A lists commercial USB-Ethernet converters that have been
confirmed as compatible.
Ethernet cable
Depending on the connection type, use either straight through or
crossover cables.
Program Development Tools
Prepare some tools for developing and running programs for performing
remote control. Refer to the USB-Ethernet converter manual and SCPI
Standard for the specifications required by the program development
tools.