Topmenu:unit:nselect - Anritsu MT9083 Series Operation Manual

3.5.5 TOPMenu:UNIT:NSELect

Syntax: TOPMenu:NSELect<wsp><num_id>
Description: Sets the specified Unit to be currently selected to run with OTDR instrument.
Parameters: The numeric value identifier assigned by the TOPMenu subsystem for the Unit to
be selected as a short value
Response: None
Example:
TOPM:UNIT:NSEL 2
3.5.6 TOPMenu:UNIT:NSELect?
Syntax: TOPMenu:UNIT:NSELect?
Description: Returns the numeric value identifier of the currently selected Unit
Parameters: None
Response: Returns a numeric value of the currently selected Unit
Example:
TOPM:UNIT:NSEL? −> 1<END>
3.5 TOPMenu Subsystem Commands
3
3-23