Anritsu MT9083 Series Operation Manual page 57

4.1 Command Summary
SENSe:TRACe:READy? - Queries if the trace data is ready.
SENSe:CONCheck - Sets connection check option ON or OFF.
SENSe:CONCheck? - Queries if the connection check option enabled.
SENSe:LIVCheck - Sets live fiber check option ON or OFF.
SENSe:LIVCheck? - Queries if the live fiber check option enabled.
SENSe:FIBer:IOR - Sets fiber IOR value.
SENSe:FIBer:IOR? - Queries fiber IOR value.
SENSe:FIBer:BSC - Sets fiber BSC value.
SENSe:FIBer:BSC? - Queries fiber BSC value.
SENSe:HOFFset - Sets horizontal offset value.
SENSe:HOFFset? - Queries horizontal offset value.
SENSe:VOFFset - Sets vertical offset value.
SENSe:VOFFset? - Queries vertical offset value.
4
SENSe:LSALeft - Sets left LSA maker position values.
SENSe:LSALeft? - Queries left LSA maker position values.
SENSe:LSARight - Sets right LSA maker position values.
SENSe:LSARight? - Queries right LSA maker values.
SENSe:ACURsor - Sets A cursor position.
SENSe:ACURsor? - Queries A cursor position value.
SENSe:BCURsor - Sets B cursor position.
SENSe:BCURsor? - Queries B cursor position value.
SENSe:LOSS:MODE - Sets current loss mode.
SENSe:LOSS:MODE? - Queries currently selected loss mode.
SENSe:ORL:MODE – Sets current ORL Mode.
SENSe:ORL:MODE? – Queries current ORL Mode.
SENSe:ANALyze:PARameters - Sets trace analysis parameters values.
SENSe:ANALyze:PARameters? - Queries trace analysis parameters values.
SENSe:ANALyze:AUTO - Sets trace auto analysis option ON/OFF.
SENSe:ANALyze:AUTO? - Queries if the trace auto analysis option is on.
Trace Subsystem Commands
TRACe:PARameters? - Queries trace parameters summary in text format.
TRACe:ANALyze - Sets trace to be analyzed.
TRACe:ANALyze? - Queries if the trace is analyzed.
TRACe:ANALyze:ORL - Performs ORL calculations on the trace.
TRACe:MDLOss? - Queries trace loss value for current loss mode.
TRACe:EELOss? - Queries trace end-to-end loss value.
TRACe:LOAD:SOR? - Queries trace data in SOR file format.
TRACe:LOAD:TEXT? - Queries trace data in ASCII text format.
TRACe:LOAD:DATA? - Queries trace data points in binary format.
TRACe:HEADer - Sets Trace Header.
TRACe:HEADer? - Queries Trace Header.
TRACe:LOADSTORe:SOR - Stores the SOR file in internal memory of MT9083.
4-5