Anritsu MT9083 Series Operation Manual page 67

4.4.4 SENSe:CONCheck? Command
Syntax: SENSe:CONCheck?
Parameters: None
Description: Queries if connection check option is ON.
Example: sens:conc? --- 1<END>
Response: Possible response values:
1 = Connection check is ON.
0 = Connection check is OFF.
Errors: None
4.4.5 SENSe:CONCheck Command
Syntax: SENSe:CONCheck<wsp><value>
Parameters: <value>
Boolean value
1 or on = Connection check is ON.
0 or off = Connection check is OFF.
Description: Sets Connection Check option ON or OFF.
Example: sens:conc ON<END>
Response: NONE
Errors:
(–200, "std_execGen, Test is Active")
(–104, "std_wrongParamType, Data Type Error")
4.4.6 SENSe:LIVCheck? Command
Syntax: SENSe:LIVCheck?
Parameters: None
Description: Queries if live fiber check option is ON.
Example: sens:livc? --- 1<END>
Response: Possible response values:
1 = Live fiber check is ON.
0 = Live fiber check is OFF.
Errors: None
4.4 SENSe Subsystem Commands
4
4-15