Source Subsystem Commands - Anritsu MT9083 Series Operation Manual

4.3 SOURce Subsystem Commands

4.3.1 SOURce:WAVelength:AVAilable? Command
Syntax: SOURce:WAVelength:AVAilable?
Parameters: None
Description: Queries the list of available wavelengths.
Example: sour:wav:ava? --- 1310, 1550<END>
Response: List of available wavelength in nanometers (NM).
Errors: None
4.3.2 SOURce:WAVelength Command
Syntax: SOURce:WAVelength<wsp><value>
Parameters: <value>
Integer value format
Range: Integer WL value returned by available wavelengths query command.
Wavelength "ALL" cannot be selected.
Description: Set current wavelength. Wavelength value units – NM. Wavelength will be set only
if the new value matches the one in the list of the available wavelengths.
Example: sour:wav 1310
Response: None
Errors: (–200, "std_execGen, Test is Active")
(–224, "std_illegalParmValue, Invalid Parameter Value")
4.3.3 SOURce:WAVelength? Command
Syntax: SOURce:WAVelength?
Parameters: None
Description: Queries current wavelength.
Available first wavelength will be returned when "Wavelength ALL" is set.
Example: sour:wav? --- 1310<END>
Response: Current wavelength value.
Errors: None
The SOURce subsystem controls/query OTDR's optical source
parameters.
4.3 SOURce Subsystem Commands
4
4-9