Root Level Commands - Anritsu MT9083 Series Operation Manual

4.2 Root Level Commands

4.2.1 ABORt Command
Syntax: ABORt
Parameters: None
Description: Aborts the active test. The trace data will be lost.
Example: abor
Response: None
Errors: (–200, "std_execGen, Test is Inactive")
4.2.2 STOP Command
Syntax: STOP
Parameters: None
Description: Stops the active test. The trace data will be preserved.
Example: stop
Response: None
Error:
(–201, "std_execGen, Test is Inactive")
(–200, "std_execGen, Instrument is Busy")
4.2.3 INITiate Command
Syntax: INITiate
Parameters: None
Description: Starts OTDR test with currently selected settings. Manual test mode.
This command is an overlapped command.
When this command is executed with "Wavelength all" selected, the measurement
starts with the minimum wavelength, and no measurement is done for other
wavelengths.
Example: init
Response: None
Error:
(–200, "std_execGen, Test is Active")
(–200, "std_execGen, Instrument is Busy")
(–200, "std_execGen, Start Test Failed")
(–200, "std_execGen, Connection Check Failed")
(–200, "std_execGen, Live Fiber Check Failed")
These commands start/stop OTDR test sequence
4.2 Root Level Commands
4
4-7