Chapter 4 OTDR Commands
4.1 Command Summary
ABORt - Aborts active test, data is lost.
STOP – Stops the test, keeps the trace on screen.
INITiate - Start test with manual test settings.
INITiate:AUTo - Start auto-test.
INITiate:RTIMe – Start real time test with manual settings.
INITiate? - Queries if test is active.
SOURce:WAVelength:AVAilable? - Queries available wavelength list.
SOURce:WAVelength - Sets current selected wavelength.
SOURce:WAVelength? - Queries current selected wavelength.
SOURce:RANge:AVAilable? - Queries available ranges list.
SOURce:RANge - Sets current selected range.
SOURce:RANge? - Queries current selected range.
SOURce:RESo:AVAilable? - Queries available resolutions list.
SOURce:RESo - Sets current selected resolution.
SOURce:RESo? - Queries current selected resolution.
SOURce:PULSe:AVAilable? - Queries available pulse width list.
SOURce:PULSe - Sets current selected pulse width.
SOURce:PULSe? - Queries current selected pulse width.
SOURce:PULSe:ENHanced:AVAilable? - Queries if enhanced mode is available for selected
pulse width.
SOURce:PULSe:ENHanced - Sets enhanced mode for current selected pulse width.
SOURce:PULSe:ENHanced? - Queries enhanced mode for current selected pulse width.
SOURce:AVERages:TIMe - Sets averaging time for the next test.
SOURce:AVERages:TIMe? - Queries averaging time for the next test.
SENSe:AVERages? - Queries averages count since test started.
SENSe:AVERages:TIMe? - Queries averaging time since test started.
4-4
The Command Summary section provides a list of the SCPI commands
for the MT9083A2/B2/C2 Standard OTDR application, and a brief
description for each command.
Commands and queries in this section can be received only in the OTDR
(Standard) mode.
Root level commands
Source Subsystem Commands
Sense Subsystem Commands