Sre Service Request Enable Command; Sre? Service Request Enable Query - Anritsu MT9083 Series Operation Manual

3.1.9 *SRE Service Request Enable Command

Syntax: *SRE<wsp><value>
Description: The standard Service Request Enable command (*SRE) sets bits in the
Service Request Enable register. A 1 in a bit in the enable register enables the
corresponding bit in the Service Request Enable register. The register is cleared at
power-on. The *RST and *CLS commands do not affect the register.
Parameters: The bit value for the register (a short value):
7 Operation Status Summary 128
6 Master Summary Status (MSS) / Request Service (RQS) 64
5 Standard Event Status Summary (ESB) 32
4 Message Available (MAV) 16
3 Questionable Status Summary 8
2 Error/Event Queue Summary 4
1 Available 2
0 Available 1
Response: None
Example:
*SRE 64

3.1.10 *SRE? Service Request Enable Query

Syntax: *SRE?
Description: The Service Request Enable query *SRE? returns the contents of the Service
Request Enable register (see *SRE for information on this register).
Parameters: None
Response: The bit value for the register (a short value).
7 Operation Status Summary 128
6 Master Summary Status (MSS) / Request Service (RQS) 64
5 Standard Event Status Summary (ESB) 32
4 Message Available (MAV) 16
3 Questionable Status Summary 8
2 Error/Event Queue Summary 4
1 Available 2
0 Available 1
Example:
*SRE? −> 21<END>
3.1 Star (IEEE 488.2) Subsystem Commands
3
3-7